Bring the connections together
VeaHub
Connect suitable devices and interfaces, then organise them as one home in VeaHome.
Local network · compatible interfaces04 / Device tailoring
A connection for the things nothing else fits.
Every home has one: a gate controller nobody supports, a pump with no interface, a sensor that has to sit where no outlet is. We design hardware and firmware ourselves, so when no off-the-shelf device fits, we can shape one around the need.
- An assessment and clear quote
- The right interface for the job
- A tested, documented solution
A connection shaped around you.
What is included
Everything this covers.
- 01
Understanding the gap
What the appliance is, what signal it gives or takes, and what you want the house to do with it.
- 02
The right interface
A relay, a dry contact, an infrared or radio bridge, a wired bus: we choose the connection that suits the equipment.
- 03
Enclosures that belong
Housings designed and printed to fit the place they go, indoors or out.
- 04
Firmware and logic
The device's behaviour written for the job, and joined to VeaHome like any other.
- 05
Tested before promised
We confirm the hardware and run the complete routine before we call a capability done.
- 06
Documented
You get a note of what was built and how it connects, so it can be maintained.
Across the whole home
Every part of home. Working together.
Set the mood. Find your comfort. Take care of the everyday.
LightingEvery light in the house, set the way the moment needs.
ClimateComfort in every room, without running anything longer than it needs to.
EnergySee where the power goes, and what it costs, as it happens.
SecurityKnow what is happening at home, and act on it from the app.
UtilityThe hard-working parts of the house, from the water heater to the robot vacuum.
Come along, step by step
Here is how we get there.
What happens at each stage, and what you have in hand at the end.
- 01
Describe the problem
Send photos, the model if there is one, and what you wish it did.
- 02
We assess it
What can be done, how, and what it would cost. Sometimes the honest answer is a different approach.
- 03
Design and build
Interface, enclosure and firmware, tested on the bench first.
- 04
Fit and verify
Installed, joined to VeaHome and tested in your home.
What you leave with
- An assessment you can act on
- A device built for the job
- It appears in VeaHome like any other
- Documentation of what was built
Meet the devices
Solve the part a standard device cannot.
An awkward enclosure or an existing control input. We start from devices like these, our own VeaHub, VeaBlaster and VeaPhone among them, and build what is missing around your project.
Keep your remote-controlled AC
VeaBlaster
Give compatible infrared appliances a place in your routines.
Infrared · supported RF
Connect sensing to control
SONOFF TH Elite
Pair a supported temperature probe with a correctly rated control circuit.
Wi-Fi · compatible probe
Connect an existing circuit
SONOFF BASICR4
Bring a suitable light or circuit into schedules while keeping the equipment you own.
Wi-Fi · eWeLinkExamples to help plan your setup. We confirm the model, supported functions and installation requirements before recommending a connection.
The connections behind the experience
From a requirement to a working connection.
Use the equipment you own, add the right interface, and bring the useful controls into VeaHome.
Your equipment & requirement
Interface and feasibility reviewA scoped design
We establish what signals exist, what needs adapting and what success should look like.
Sensors, firmware & enclosure
Prototype + integration testingA device that fits the job
Develop and test the necessary parts together, including recovery behaviour and mounting.
Tested device
VeaHub / supported software interfaceA usable home control
Document the connection, demonstrate the routine and agree how the custom device will be supported.
Choose the right connection.
Existing networks and suitable interfaces can work together.
- Infrared
- 433 MHz RF
- HTTP / REST
- Dry contact
Integrations, hosted for you. Brand integrations that work through a cloud service run on our servers in every plan, or in your home on a VeaHome Local Server. How many brand accounts you can link depends on your plan. Compatible Vea devices and local connections work without a subscription. Cloud-only services still need the internet.
Protocols shown are connection options, not radios built into every VeaHub. We match the controller, adapter or gateway to your devices.
Ideas you can take home
A little reading. A clearer plan.
Good questions
Before you decide.
What kinds of things can be connected?
Typical cases are a building gate or entrance line, a water heater or a pump through a relay rated for it, an air conditioner that only has a remote, and sensors for a garden or a roof. If it has a signal or a switch, there is usually a way.
Is a custom device always the answer?
No. We look for an existing product first, because it is cheaper and easier to replace. We build only when nothing suitable exists.
How long does it take?
It depends on the work. A simple interface is quick; a new enclosure and firmware take longer. You get a timeline with the assessment, before anything is built.
From an idea to everyday living
The rest of what we do.
Bring your home to life
Let’s bring your home to life.
Start with your devices. We’ll help connect the possibilities.
Free first consultation
Talk through your home and goals before choosing your setup.
Compatibility, checked
We review the devices and connection requirements with you.
Covered hardware warranty
Replacement support for covered hardware, under the agreed warranty terms.
People you can reach
Setup guidance and care options from the VeaLife team.